Parts index


We stock over 80 Cable related

Here are all the spares and sundries for control cables.


Showing parts 1 - 80 of 80

20   |  40   |  80  |  ALL   |

Sort by:


Lambretta Cable, Inner, Throttle, small SIL
MBL1413

This is a standard throttle cable inner cable.... [more]


£ 1.55£ 1.29 (Ex Vat)
Lambretta Cotter pin, 2x16mm for petrol tap joint, headset throttle return spring, rear brake clams, stainless steel
MBFCOT2X16

Amongst many applications this fastener can specifically be used on: Lambretta petrol tap rod Lambretta rear brake pedal clamp assembly Lambretta headset throttle return spring    Note:... [more]


£ 0.16£ 0.13 (Ex Vat)
Lambretta Nut, 10mm half lock, rear brake pedal clamp nut, stainless steel
MBFHN10X1

This fastener has universal applications but is mainly used for Lambretta rear brake pedal clamps.... [more]


£ 0.72£ 0.60 (Ex Vat)
Lambretta Cable, Throttle trunnion, large 6mm, (nipple) MB
MBL0051

This trunnion fits on the end of a universal throttle inner cable inside the throttle roller.    Worth keeping a spare in your glove... [more]


£ 0.96£ 0.80 (Ex Vat)
Lambretta Headset (handlebar) clutch/front brake lever cable barrel, MB
MBL0069

This nipple sits inside your handlebar lever and holds the end of some inner cables. A MB product made in stainless steel.... [more]


£ 1.27£ 1.06 (Ex Vat)
Lambretta Gear and clutch cable bellow rubber
MBL0380

These bellows go over the control cables to protect the inners from the elements.... [more]


£ 2.50£ 2.08 (Ex Vat)
Lambretta Gear and clutch cable tube, Black, MB
MBL0381

This piece of black tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved... [more]


£ 3.49£ 2.91 (Ex Vat)
Lambretta Gear and clutch cable tube, Grey, MB
MBL0382

This piece of grey tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved... [more]


£ 3.62£ 3.02 (Ex Vat)
Lambretta Rear brake pedal rubber, Black
MBL0412

This is a quality remade black rubber for your rear brake pedal.... [more]


£ 4.91£ 4.09 (Ex Vat)
Lambretta Rear brake pedal rubber, Grey
MBL0413

This is a quality remade grey rubber for your rear brake pedal.... [more]


£ 4.91£ 4.09 (Ex Vat)
Lambretta Gasket, gear and clutch adjuster block, MB
MBP0171

This gasket fits between the engine casing and the cable adjuster block.    Remade for MB.... [more]


£ 0.77£ 0.64 (Ex Vat)
Lambretta Headset (handlebar) throttle trunnion for carb end, standard carburettors, 4mm, MB
MBL0681

This trunnion is used on a standard throttle cable at the carburettor end for adjustment. A quality MB made Brass item which comes with a... [more]


£ 0.66£ 0.55 (Ex Vat)
Lambretta Rear brake cable bellows
MBL0715

These bellows fit over your rear brake cable inner where it is exposed between the top hat and the brake pedal.... [more]


£ 3.40£ 2.83 (Ex Vat)
Lambretta Clutch cable protection sleeve, Black
MBL0904

This piece of sleeve fits on the clutch outer cable to protect it from the elements and road dirt.  It works in convunction with a... [more]


£ 0.29£ 0.24 (Ex Vat)
Lambretta Gear trunnion disc washer, stainless steel, MB
MBP0232

It might seem picky but we had these discs made to fit inside the cable trunnion.    We fit one to each trunnion but they are... [more]


£ 0.78£ 0.65 (Ex Vat)
Lambretta Cable strap, one required, stainless steel, MB
MBP0111K

This stainless steel strap secures the control cables to the frame, near the junction of the fork stem and the frame. Another top quality made... [more]


£ 4.55£ 3.79 (Ex Vat)
Lambretta Rear brake cable top hat bush, stainless steel, each, MB
MBP0015

This is a stainless steel rear brake top hat bush one sits in your engine casing and one sits in your frame for the... [more]


£ 3.54£ 2.95 (Ex Vat)
Lambretta Fork link locating washer and rear brake pedal inner washer, stainless steel, MB
MBP0018

This washer sits in your fork link to hold your spindle (and hub!) in place so it is important it is the right size... [more]


£ 1.06£ 0.88 (Ex Vat)
Lambretta Gear and clutch adjuster screw with nut, stainless steel, MB
MBP0023K

This is a MB remade cable adjuster screw complete with nut, all in stainless steel.    No more going to adjust your cables to... [more]


£ 4.22£ 3.52 (Ex Vat)
Lambretta Gear linkage tie bar, high tensile, zinc plated, MB
MBP0024

The original item was exposed to the elements and will rust in a short time.    Now redesigned and remade with a lighter version... [more]


£ 9.38£ 7.82 (Ex Vat)
Lambretta Gear linkage swivel pivot base, stainless steel, MB
MBP0026K

This is another part that we've looked at and said they go rusty and spoil a nice engine so we have remade these in... [more]


£ 15.77£ 13.14 (Ex Vat)
Lambretta Gear and clutch trunnion, universal long type, each, stainless steel, MB
MBP0054K

MB remade cable trunnion in stainless steel with a stainless steel grub screw like original and uses a 3mm allen key not the oddball... [more]


£ 3.06£ 2.55 (Ex Vat)
Lambretta Rear brake pedal clamp pin, stainless steel, MB
MBP0231

This is a MB remade stainless steel clevis pin suitable for use with a rear brake pedal clamp assembly.... [more]


£ 2.32£ 1.93 (Ex Vat)
Lambretta Rear brake pedal bush, nylon, MB
MRB0407

This is a remade rear brake pedal bush in hard wearing nylon.    Remade by MB. ... [more]


£ 1.24£ 1.03 (Ex Vat)
Lambretta Rear brake pedal clamp bolt, stainless steel, MB
MBP0057

This is a quality CNC machined stainless steel rear brake pedal clamp bolt. A MB product.... [more]


£ 4.64£ 3.87 (Ex Vat)
Lambretta Rear brake pedal clamp plate, stainless steel, each, MB
MBP0058

This is a laser cut stainless steel rear brake pedal clamp.    You need two per scooter or why not buy our handy clamp kit which... [more]


£ 1.86£ 1.55 (Ex Vat)
Lambretta Rear brake pedal clamp bolt assembly, stainless steel, MB
MBP0060K

This is a remade nut bolt and washer for the rear brake pedal clamp.    It is part of the full kit but is here separately... [more]


£ 5.72£ 4.77 (Ex Vat)
Lambretta Choke plate, stainless steel, MB
MBP0063

This is our MB remade Stainless Steel choke cable clamp for all Series 3 Lambrettas.    It bolts to the back of your choke lever assembly... [more]


£ 4.90£ 4.08 (Ex Vat)
Lambretta Gear arm shim, 12mm, stainless steel, MB
MBP0072

This MB laser cut stainless steel 1mm shim can be used on the gear arm clutch arm brake cam and rear brake pedal.... [more]


£ 0.54£ 0.45 (Ex Vat)
Lambretta Cable tie for frame, stainless steel, MB
MBP0073

MB remade cable ties to secure your cables and loom to your frame.   These are now improved stainless steel as originals are prone to... [more]


£ 2.39£ 1.99 (Ex Vat)
Lambretta Rear brake pedal spring, stainless steel, MB
MBP0074

This is a MB remade rear brake pedal spring in stainless steel.... [more]


£ 4.13£ 3.44 (Ex Vat)
Lambretta Front brake cable adjuster assembly, stainless nut type, stainless steel, MB
MBP0086K

We had these front brake adjusters remade in stainless steel even the spring.    Why spoil your scooter re-using the old one? An MB product at its... [more]


£ 24.72£ 20.60 (Ex Vat)
Lambretta Rear brake cable adjuster assembly with stainless steel nut, MB
MBP0087K

Complete rear brake adjuster assembly, completely made in stainless steel.    Why spoil your scooter re-using the old one? Another quality MB product.... [more]


£ 26.76£ 22.30 (Ex Vat)
Lambretta Gear and clutch adjuster block cable clamp, stainless steel, MB
MBP0109

This remade bracket sits under the cable adjuster block and holds the rear brake cable away from the rear wheel.    JANUARY 2013 - These... [more]


£ 7.73£ 6.44 (Ex Vat)
Lambretta Gear linkage swivel shim for standard pivot bases, stainless steel, MB
MBP0128

This MB remade precision laser cut stainless steel shim fits on the gear pivot base on standard type gear pivot bases.    It is... [more]


£ 0.97£ 0.81 (Ex Vat)
Lambretta Brake pedal shim, stainless steel, MB
MBP0129

This MB remade precision laser cut stainless steel shim fits between the rear brake pedal and the frame.... [more]


£ 0.97£ 0.81 (Ex Vat)
Lambretta Rear brake pedal complete kit, Black rubber, Series 3, MB
MBP0156KBL

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit with the cable, brake arm and adjuster. The kit includes: Rear brake pedal,... [more]


£ 98.77£ 82.31 (Ex Vat)
Lambretta Rear brake pedal kit, Grey rubber, Series 3, MB
MBP0157KGR

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit with the cable, brake arm and adjuster. The kit includes: Rear brake pedal,... [more]


£ 98.65£ 82.21 (Ex Vat)
Lambretta Rear brake pedal kit, Black rubber, Series 3, MB
MBP0154KBL

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit. Which includes: Rear brake pedal, hardened rust resistant (some may come in painted... [more]


£ 61.75£ 51.46 (Ex Vat)
Lambretta Rear brake pedal kit, Grey rubber, Series 3, MB
MBP0155KGR

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit. Which includes: Rear brake pedal, hardened rust resistant (some may come in painted... [more]


£ 61.75£ 51.46 (Ex Vat)
Lambretta Gasket, gear pivot base, MB
MBP0172

This gasket fits between the engine casing and the gear pivot base.    Remade for MB.... [more]


£ 1.13£ 0.94 (Ex Vat)
Lambretta Front brake cable spacer tube, (replaces brake light switch) MB
MRB0724

A new design by Mark Broadhurst.    Some modern front brake cables come in two parts to allow for a front brake cable.    To connect the cable... [more]


£ 5.56£ 4.63 (Ex Vat)
Lambretta Rear brake pedal clamp kit (set) stainless steel, MB
MBP0059K

This handy kit contains two clamps, the special bolt, nut, clevis pin and split pin.    Everything you need for the brake cable end of the... [more]


£ 11.99£ 9.99 (Ex Vat)
Lambretta Rear brake pedal overhaul kit, stainless steel, MB
MBP0083K

This handy kit contains everything you need to overhaul your rear brake pedal. 12mm shim brake... [more]


£ 7.74£ 6.45 (Ex Vat)
Lambretta Gear trunnion grub screw, 6x6mm, stainless steel
MBFGS6X6

Various types of screw have been used in a gear trunion, this is the one MB use in their gear trunnion.... [more]


£ 0.18£ 0.15 (Ex Vat)
Lambretta Choke assembly body brass cap
MBL1205

This is a NOS part fitted into a choke assembly.... [more]


£ 0.90£ 0.75 (Ex Vat)
Lambretta Choke assembly body spring
MBL1206

This is a NOS choke assembly return spring.... [more]


£ 0.53£ 0.44 (Ex Vat)
Lambretta Rear brake pedal, Series 3, MB
MBP0138K

Remade MB Series 3 rear brake pedal. Made from high strength rust resistant steel (some may come painted in Silver).  Slightly modified to put a greater... [more]


£ 35.12£ 29.27 (Ex Vat)
Lambretta Front brake adjuster just the main threaded rod stainless steel, MB
MBP0579

Lambretta Front brake adjuster, just the main threaded rod. Stainless steel, MB made.... [more]


£ 10.68£ 8.90 (Ex Vat)
Lambretta Cable, Black, Choke, standard, nylon lined, Race-Tour, MB
MBP0609BL

Lambretta MB friction free choke cable in Black. This is a standard length version that fits carbs on either side. Perfect fit, no cutting/adjustment or extra... [more]


£ 4.24£ 3.53 (Ex Vat)
Lambretta Cable, Grey, Rear brake nylon lined, threaded inner barrel, nut, washer, MB
MBP0608GR

Lambretta grey friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined grey outer and threaded inner cable. MB's new QA rear brake inner... [more]


£ 15.38£ 12.82 (Ex Vat)
Lambretta Cable, Black, Clutch nylon lined, SIL
MBL1667BL

Good quality perfect fitting nylon lined Black clutch cable.... [more]


£ 3.86£ 3.22 (Ex Vat)
Lambretta Cable, Braided, Rear brake nylon lined, threaded inner Race-Tour, MB
MBP0602BR

Lambretta stainless super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free stainless steel outer cable, MB Braided stainless steel... [more]


£ 9.66£ 8.05 (Ex Vat)
Lambretta Cable, Grey, Rear brake nylon lined, threaded inner Race-Tour, MB
MBP0602GR

Lambretta Grey super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free outer cable, MB Braided stainless steel inner with... [more]


£ 10.21£ 8.51 (Ex Vat)
Lambretta Cable, Grey, Choke, standard, nylon lined, uses elbow, Race-Tour, MB
MBP0609GR

Lambretta MB friction free choke cable in Grey. This is a standard length version that fits carbs on the left side and uses the standard... [more]


£ 4.24£ 3.53 (Ex Vat)
Lambretta Cable, Braided, Rear brake nylon lined, threaded inner barrel, nut, MB
MBP0608BR

Lambretta Braided friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined, stainless steel braided outers with clear coat cover and threaded... [more]


£ 14.83£ 12.36 (Ex Vat)
Lambretta Speedo cable olive, Brass, MB
MBP0493

A handy little spare part that always seems to disappear. These haven't been available until we remade them. Before that all you could do was buy a... [more]


£ 2.28£ 1.90 (Ex Vat)
Lambretta Cable, grey, nylon lined Rear brake with standard inner
MBL1394GR

Grey nylon lined rear brake cable with standard type inner cable. Fits all series 1, 2 and 3 Lambrettas.... [more]


£ 3.38£ 2.82 (Ex Vat)
Lambretta Cable, Black, Choke, short nylon lined, Race-Tour, MB
MBP0610BL

Lambretta MB friction free choke cable in Black. This is a slightly shorter length version that fits carbs on the right side for TS1/RB/SS type... [more]


£ 4.48£ 3.73 (Ex Vat)
Lambretta Cable, Grey, Choke, short nylon lined, Race-Tour, MB
MBP0610GR

Lambretta MB friction free choke cable in Grey. This is a slightly shorter length version that fits carbs on the right side for TS1/RB/SS type... [more]


£ 3.04£ 2.53 (Ex Vat)
Lambretta Front brake cable top hat split bush for hub, stainless steel, MB
MBP0303

The small cable top hat with slit in it, that sits in the round hole in the hub and then the cable sits in... [more]


£ 2.45£ 2.04 (Ex Vat)
Lambretta Cable, Inner, Rear brake, with threaded end, barrel, nut, inner only, Race-Tour, MB
MBP0626

Lambretta rear brake cable inner, with threaded end. Includes stainless steel barrel, nut, washer. An MB product. Inner length - 910mm plus threaded part 75mm = Total... [more]


£ 10.70£ 8.92 (Ex Vat)
Lambretta Cable, Grey, Throttle, Small nylon lined for standard carbs, MB
MBL1672GRK

We had this throttle cable specially made to suit any Lambretta (Series 1, 2 or 3) with a small carburettor fitted.  It comes complete with... [more]


£ 6.89£ 5.74 (Ex Vat)
Lambretta Engine clutch and gear linkage kit (set) zinc plated version, short clutch arm, MB
MBP0621K

This precision MB linkage kit is designed by Mark Broadhurst and consists of:   Adjuster block, new MB type in hardened steel, MB Adjuster screws x 3,... [more]


£ 102.67£ 85.56 (Ex Vat)
Lambretta Cable, Black, Front brake nylon lined, MB
MBL1671BLK

MB made front brake cable for standard drum and disc hubs in Black. Perfect fitting, nylon lined and friction free.... [more]


£ 9.64£ 8.03 (Ex Vat)
Lambretta Cable, Black, Rear brake nylon lined, threaded inner barrel, nut, washer, MB
MBP0608BL

Lambretta black friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined black outer and threaded inner cable. MB's new QA rear brake... [more]


£ 15.50£ 12.92 (Ex Vat)
Lambretta Cable, ferrule, MB
MBP0448

Universal cable ferrule the part at the end of each cable.    Fits any cable.    Ideal if you shorten a cable, just lightly... [more]


£ 0.30£ 0.25 (Ex Vat)
Lambretta Cable, Inner, Gear, Race-Tour, MB
MBP0445

Spare Lambretta gear inner cable for the MB stainless friction free cables.    Also fit other outer cables.... [more]


£ 1.88£ 1.57 (Ex Vat)
Lambretta Rear brake cable adjuster assembly, hex nut, Gp type, stainless steel, MB
MBP0539K

We had these rear brake adjusters remade in stainless steel even the spring.  Why spoil your scooter re-using the old one? An MB product at its best. Use the... [more]


£ 24.31£ 20.26 (Ex Vat)
Lambretta Cable, Black, Rear brake nylon lined, threaded inner Race-Tour, MB
MBP0602BL

Lambretta Black super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free outer cable, MB Braided stainless steel inner with... [more]


£ 10.33£ 8.61 (Ex Vat)
Lambretta Rear brake cable, Black, nylon lined, standard inner, MB
MBL1669GR

Grey rear brake cable, perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]


£ 7.78£ 6.48 (Ex Vat)
Lambretta Rear brake cable, Black, nylon lined, standard inner, MB
MBL1669BL

Black rear brake cable, perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]


£ 7.90£ 6.58 (Ex Vat)
Lambretta Cable, Braided, Rear brake nylon lined, with std inner, Race-Tour, MB
MBL1393BRK

Rear brake cable, braided stainless steel type. Perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]


£ 7.22£ 6.02 (Ex Vat)
Lambretta Brake adjuster hex nut, Gp, stainless steel, MB
MRB0877

This special nut is used on the front and rear brake adjusters on Lambretta GP/DL model scooters. It is made from stainless steel.... [more]


£ 3.10£ 2.58 (Ex Vat)
Lambretta Front brake cable adjuster assembly, hex nut type, Gp, stainless steel, MB
MBP0540K

We had these front brake adjusters remade in stainless steel even the spring.  Why spoil your scooter re-using the old one? An MB product at its... [more]


£ 22.27£ 18.56 (Ex Vat)
Lambretta Rear brake cable adjuster clamp, stainless steel, MB
MBP0366

Lambretta Rear brake cable adjuster clamp. Stainless steel, MB... [more]


£ 4.20£ 3.50 (Ex Vat)