Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB

MRB0759K

This is our 47 tooth MB Race-Tour uprated internal clutch assembly.

With the correct plate set up it will take any power you want.

Simple easy to fit using standard Lambretta workshop tools and standard parts.

Interchangeable with other products.

It comes complete with:

  • 47 tooth MB CNC hardened crown wheel
  • Extended MB CNC hardened clutch flange
  • Deepened MB CNC hardened clutch spider
  • Clutch nut
  • Clutch tab washer
  • MB Clutch springs
  • Clutch needle bearing x 2
  • Clutch circlip
     

Requires either our 5 plate clutch kit or our 6 plate clutch kit or create a 7 plate kit or use your own plate set up.

Reed more here



Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB
  • Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB
  • Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB
  • Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB
  • Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB
  • Lambretta Clutch assembly (kit) 47 tooth (5, 6 or 7 plate) requires plate kit, MB

£ 351.89
Price: £ 293.24 Ex Vat



Temporarily out of stock
Please check back later

Related Items (3)

Lambretta Race-Tour Clutch plate kit (6 plate) (6x2.6mm friction, 5x1.5mm steels, 2.5mm top plate, MB springs) MB
MRB0801K

MB 6 plate clutch kit to suit our MB Race-Tour clutch assemblies.    This kit is our upgraded version of our 5 plate kit (MB0760K)... [more]


£ 53.59£ 44.66 (Ex Vat)
Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
MRB0760K

This 5 plate clutch kit suits our MB Race-Tour 46 and 47 internal clutch assembly.    This kit should work quite well up around... [more]


£ 47.69£ 39.74 (Ex Vat)
Lambretta Clutch assembly (kit) 46 tooth (5, 6 or 7 plate) requires plate kit, MB
MRB0758K

This is our 46 tooth MB Race-Tour uprated internal clutch assembly.    With the correct plate set up it will take any power you... [more]


£ 351.89£ 293.24 (Ex Vat)


Features

  • Light weight with hardened clutch bearing bush so improved needle roller bearings can be used.
  • Machined deeper so 4, 5 or 6 plates can be fitted and helps prevent clutch drag.

Technical

  • Made in the UK using modern heat trated steels, lightened and precision CNC machined.
  • Can be used as a MRB kit or each part can be used individually
  • Works in a standard or tuned engine

Development History

  • Mark Broadhurst designed these new Race-Tour 4, 5 or 6 plate clutch assemblys
  • Fed up with clutch slip we developed these kits
  • There was a need for a mass produced precision clutch kit that worked within a budget
  • This is a development of the original MRB external clutch kit

Reasons to Buy

  • Lightweight
  • Strong
  • Hardened
  • Precision machined
  • Adjustable lift
  • No rock
  • Easy fit
  • No packer required
  • Only two simple mods required

Tips

Works with various clutch set ups
  1. MRB 5 plate kit MRB0760K these use 5 x Surflex B plates and 4 x 1.5mm steels
  2. You can reduce the 1.5mm to 1.2mm steels for more clearance
  3. You can use 6 x Green or Red plates with 5 x 1.2mm steels
  4. Or you can use 6 x Green or Red plates with 1.2mm steels and 2 x 1.5mm (at the bottom)
     
  • Use a 3mm or 2.5mm top clutch plate
  • Always bend the tags down 20/30 degrees on the top clutch friction plate
  • Always file 1mm off the first fitted steel plate at five tags to clear fouling the pressure plate
  • Always dial gauge the crown wheel with the front drive sprocket to improve chain life
  • Always check sprocket lift and shim up to suit
  • Always fit new end plate bearings and clutch needle bearings
  • Make sure both clutch friction, steel, pressure plate fit and slide up and down freely
  • Always soak clutch plates in ST90 for 24 hours before fitting
  • Always use a clutch holding tool to tighten the clutch nut

Reviews

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Questions? ( 2 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Razi on 27 Mar 2016 asked "Do the Li version need to use a nipple thimble on it?"

MB Scooters Ltd replied: Yes it must use the loose nipple

Thomas on 25 May 2011 asked "I have a question about "Clutch assembly kit, 47 tooth 4,5 or 6 plate, MRB" Is the crown in this kit the same as this one?: MRB0675K"

MB Scooters Ltd replied: Yes itsd the same



If you feel something is not correct with this product description or image then please contact us using the same link