Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB

MRB0760K

This 5 plate clutch kit suits our MB Race-Tour 46 and 47 internal clutch assembly.

This kit should work quite well up around 25bhp.

It comes complete with:

  • 5 x 3.5mm MB clutch plates
  • 2.50mm MB clutch top plate
  • 1 x 2.0mm MB clutch steel
  • 2 x 1.5mm MB clutch steels
  • 1 x 1.2mm MB clutch steel


Please note: this is NOT a replacement for a Surflex 5 plate clutch kit for standard clutch assemblies. For standard 5 plate clutch kits for standard crownwheels spiders and pressure plates see MRB0811K

Our 5 plate clutch kit should be used with our deeper clutch spider and deeper pressure plate (as the corks and steels are thicker)

This will not fit a deeper clutch basket if the spider and pressure plate used are standard length.

If you are looking for a replacement Surflex 5 plate kit then please order MRB0811K

Order of assembly starting at the bottom - gear box end:

  • 3.5mm friction plate
  • 2.00mm steel plate
  • 3.5mm friction plate
  • 1.50mm steel plate
  • 3.5mm friction plate
  • 1.50mm steel plate
  • 3.5mm friction plate
  • 1.20mm steel plate
  • 3.5mm friction plate
  • 2.50mm clutch top plate
  • large clutch circlip


Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
  • Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
  • Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
  • Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
  • Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB
  • Lambretta Race-Tour Clutch plate kit (5 plate) (5x3.5mm friction and full kit for) for MB 46/47 clutch assemblies, MB

£ 47.69
Price: £ 39.74 Ex Vat



Development History

  • Mark Broadhurst designed these new Race-Tour 4, 5 or 6 plate clutch assemblys
  • Fed up with clutch slip we developed these kits
  • There was a need for a mass produced precision clutch kit that worked within a budget
  • This is a development of the original MRB external clutch kit

Tips

This clutch plate kit works with MRB internal clutch assemblies, 46 tooth MRB0759K and 47 tooth MRB0759K
 
Complete kit consists of
  • 5 x Surflex B friction plates
  • 4 x Standard 1.5mm clutch steels
  • Large clutch spring
MRB internal 4-6 plate assembly also works with various other clutch set ups
  1. You can reduce the 1.5mm to 1.2mm steels for more clearance
  2. You can use 6 x Green or Red plates with 5 x 1.2mm steels
  3. Or you can use 6 x Green or Red plates with 1.2mm steels and 2 x 1.5mm (at the bottom) 
  • Use a 3mm or 2.5mm top clutch plate
  • Always bend the tags down 20/30 degrees on the top clutch friction plate
  • Always file 1mm off the first fitted steel plate at five tags to clear fouling the pressure plate
  • Make sure both clutch friction, steel, pressure plate fit and slide up and down freely
  • Always soak clutch plates in ST90 for 24 hours before fitting

Reviews ( 1 )

 

5 star 1. Steve w 28 Aug 2020 

GOOD ALROUND PRODUCT.

 
want to offer a review?
Click here

Questions? ( 3 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Leon on 23 May 2020 asked "Just wanting to confirm that this is the correct (replacement) kit for the "MRB0858K' complete clutch. Thanks"

MB Scooters Ltd replied: Yes thats correct

Kevin on 19 Sep 2011 asked "Is there a kit like this for 6 plate internal clutch? (I have a RaceTour crownwheel but a standard clutch spider and pressure plate that I will replace with an RaceTour spider and pressure plate.)"

MB Scooters Ltd replied: If you use the MB Crownwheel, spider and pressure plate, then use 6 of either the green or red clutch plates which are thinner and the steel plate for it to fit, we do not sell these plates.

John L on 09 Jun 2011 asked "I have a question about "Clutch kit, 5 plate for MRB clutch assemblies" Can you use standard crown wheel, spider and pressure plate with this kit?"

MB Scooters Ltd replied: No this is the kit to suit our Race-Tour 5-6 plate clutch kit it wil be too thick for a standard clutch set up.



If you feel something is not correct with this product description or image then please contact us using the same link