Lambretta Gear box endplate fastener kit, with high tensile bolts and washers

MBP0212K

We recommend using this set of high tensile bolts to secure your gearbox end plate.

Yes, in theory you should use studs in aluminium but as long as your threads are OK then these bolts will be fine.

You use more of the thread when you use these bolts so your end plate is better attached.

You gain more surface area by only using a plain washer, always use a small amount of loctite on the threads.



Lambretta Gear box endplate fastener kit, with high tensile bolts and washers

£ 4.39
Price: £ 3.66 Ex Vat



Related Items (9)

Lambretta Stud 7x31.5mm - 16x8x7.5mm, gear box end plate, extra long type, self colour, MB
MBP0461

High Tensile extra long gearbox end plate stud, made for MB Scooters. The longer end of the stud screws into the casing for a better... [more]


£ 2.69£ 2.24 (Ex Vat)
Lambretta Stud stepped repair 8/7mm - 12x8x9mm, gearbox endplate, long type, MB
MBP0397

Made for MB Scooters this stepped oversize gearbox end plate stud from 8mm to 7mm has a little more thread for the casing and... [more]


£ 3.98£ 3.32 (Ex Vat)
Lambretta Stud 7x29mm - 12x8x9mm, gear box end plate, long type, self colour, MB
MBFST7X29SC

Made for MB Scooters this gearbox end plate stud has a little more thread for the casing and also for a fatter stronger nut... [more]


£ 1.14£ 0.95 (Ex Vat)
Lambretta Nut 7mm plain, high tensile thin type for gearbox endplate studs, MB
MBFPN7THIN

MB made high tensile thin 7mm nut for gearbox end plate studs. Cemically blacked. 6 required.... [more]


£ 1.50£ 1.25 (Ex Vat)
Lambretta Stud kit (set) gear box endplate long stud, nut and washer kit, MB
MBP0631K

This is a set of MB 6 high tensile gearbox end plate studs with longer studs (16x8x7.5) The nuts and washers are steel to be stronger.  A complete... [more]


£ 26.86£ 22.38 (Ex Vat)
Lambretta Stud kit (set) gear box endplate standard stud, nut and washer kit, MB
MBP0229K

This is a set of MB 6 high tensile standard gearbox end plate studs that screw into the casing. The nuts and washers are steel to... [more]


£ 14.98£ 12.48 (Ex Vat)
Lambretta Stud stepped repair 8/7mm - 20x8x9mm, gearbox endplate, extra extra long, MB
MBP0431

Stepped gearbox end plate repair stud.     Extra long, 8mm x 7mm - 9 x 8 x 20mm.    Drill the casing to... [more]


£ 3.86£ 3.22 (Ex Vat)
Lambretta Stud stepped repair 8/7mm - 18x8x9mm, gearbox endplate, extra long, MB
MBP0459

Stepped gearbox end plate repair stud.   Long, 8 x 1.25mm x 7 x 1mm   Length 9 x 8 x 18mm.  Drill the casing to 6.9mm... [more]


£ 3.86£ 3.22 (Ex Vat)
Lambretta Stud stepped repair 10/7mm - 18x8x9mm, gearbox endplate, extra long type, self colour, MB
MBP0460

Stepped gearbox end plate repair stud.   Long super oversize, 10mm x 7mm - 9 x 8 x 18mm.  Drill the casing to 8.7mm deep enough... [more]


£ 3.86£ 3.22 (Ex Vat)


Tips

Always run a 7x1mm number 3 plug tap into the end plate threads first to clean the threads to remove any debris and make sure there are full threads.

It's very important to remove oil, loose alloy and any old loctite.

Wash out the threads so any bead blast media is fully removed.


Reviews ( 8 )

 

5 star 1. Adrian M 25 Oct 2010 

Hopefully this kit will not allow the endplate to come loose (when stripping the engine originally I found the gearbox endplate to be quite loose).

 
 

5 star 2. Ken H 06 Mar 2012 

Excellent quality and fast service as usual.

 
 

5 star 3. Stuart 28 Apr 2013 

I could not get the nuts on the studs to lock up so looked on the net for something better and found these to be much better then the studs would recommend these every time. thanks for the support

 
 

5 star 4. Ken H 27 Mar 2014 

Great product which works very well with good clean threads.

 
 

5 star 5. Nathan 04 Apr 2019 

Great quality perfect for the job of securing the endplate.

 
 

5 star 6. Craig H 10 Feb 2019 

as of most parts that you get from MB you can always rely on that quality i have never had an issue with them well made and precise

 
 

5 star 7. Gary S 15 Feb 2019 

Quality parts and rapid delivery

 
 

5 star 8. Graeme b 26 Mar 2022 

1st class customer service and the new end bolts look way superior to the stud and half nuts they replaced,just take time to start thread off with fingers

 
want to offer a review?
Click here

Questions? ( 2 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Jim on 20 Apr 2020 asked "How long are these screws?"

MB Scooters Ltd replied: 7 x 25mm

Frank on 01 Jul 2010 asked "I have a question about "Gear box endplate fastener kit with high tensile bolts and washers" Hi Mark, do you still torque these bolts down to the same value as std studs and nuts? "

MB Scooters Ltd replied: If the the threads in the casing are perfect then on final assembly you torque a little more, the figure is in the Spanners Manual.



If you feel something is not correct with this product description or image then please contact us using the same link