Parts index


We stock over 56 Lambretta electrical spares

In this section you will find all the general lambretta electrical items, as well as specialised parts.


Showing parts 1 - 35 of 35

20   |  40   |  ALL   |

Sort by:


Lambretta Rear light lens screw, Li, Sx, as original, stainless steel, MB
MBFDH35X45

Remade rear light screw as original but now in Stainless steel. Fits Li, Sx, Tv type rear light units. Another quality MB product.... [more]


£ 0.78£ 0.65 (Ex Vat)
Screw 4x75mm pan head, zinc plated
MBFPH4X75ZC

Amongst many applications this fastener can specifically be used to secure a standard type coil.... [more]


£ 1.20£ 1.00 (Ex Vat)
Lambretta Battery strap rubber
MBL0008

This is a rubber for a battery strap.... [more]


£ 7.61£ 6.34 (Ex Vat)
Lambretta Headset (handlebar) head light bulb junction box holder clip, Gp, stainless steel, MB
MBL0247

This clip holds the GP bulb holder onto the Gp headlight.   You need two per headlight. Remade for MB in stainless steel.... [more]


£ 1.80£ 1.50 (Ex Vat)
Lambretta Headset (handlebar) head light spring clip top
MBL0253

This spring clip holds the GP/SX/TV/LIS headlight units to the headlight rim at the top.... [more]


£ 0.71£ 0.59 (Ex Vat)
Lambretta Junction box, AC
MBL0272

This is an Indian AC junction box for later scooters non battery Lambrettas.   It can also be used with standard looms with an up... [more]


£ 10.31£ 8.59 (Ex Vat)
Lambretta Junction box round rubber cover, SIL
MBL0273

This is a rubber cover for a junction box.... [more]


£ 2.53£ 2.11 (Ex Vat)
Lambretta Rear light unit, Gp (ribbed) Italian
MBL0353

This is a quality Italian pattern rear light unit.    It has a built in bulb holder and includes the lens.    It is standard fitment to GP... [more]


£ 39.82£ 33.18 (Ex Vat)
Lambretta Rear light lens, Gp
MBL0355

This is a quality Italian pattern rear light lens for a GP rear light unit.   It will not fit any other rear light unit.... [more]


£ 15.26£ 12.72 (Ex Vat)
Lambretta Rear light lens, Li, Tv (angle lens) Carello
MBL0356

Innocenti in their wisdom used three different types of rear light units on Series 3 Lambrettas.   The Carello (This one) lens is on... [more]


£ 16.63£ 13.86 (Ex Vat)
Lambretta Rear light rubber gasket, Black
MBL0420

This is a quality remade black rubber gasket to go between your rear light unit and your frame (Series 3).... [more]


£ 8.23£ 6.86 (Ex Vat)
Lambretta Rear light rubber gasket, Grey
MBL0421

This is a quality remade grey rubber gasket to go between your rear light unit and your frame (Series 3).... [more]


£ 7.46£ 6.22 (Ex Vat)
Lambretta Speedo bulb holder, MB
MBL0475

MB made and designed speedo bulb holder that holds the speedo bulb inside your standard Lambretta speedo. Comes perfectly wired Black main power feed wire,... [more]


£ 3.62£ 3.02 (Ex Vat)
Lambretta Rear brake light switch rubber, MB
MBL0557

This MB made rubber protects the wiring on the rear brake light switch from the elements. A quality item that compliments our own MB light... [more]


£ 1.88£ 1.57 (Ex Vat)
Lambretta Headset (handlebar) head light rim, GP
MBL0598

Fits all Italian and Indian GP headsets.  Chrome Plated... [more]


£ 29.59£ 24.66 (Ex Vat)
Lambretta Headset (handlebar) head light beam adjuster and earth lead
MBL0661

This item fits under the rim of all Series 3 headlight rims and is used to adjust the angle of the beam, as well... [more]


£ 3.47£ 2.89 (Ex Vat)
Lambretta Headset (handlebar) light switch dip dazzle, Black, Gp,
MBL0748

This is a remade light switch for Sx, Tv, and GP light switch housings.    It has black buttons as used on a GP. ... [more]


£ 27.50£ 22.92 (Ex Vat)
Lambretta Rear light lens, Li, Sx (holes above centre) Aprilia
MBL0750

Innocenti in their wisdom used three different types of rear light units on Series 3 Lambrettas.  There are no hard and fast rules to say... [more]


£ 14.93£ 12.44 (Ex Vat)
Lambretta Headset (handlebar) ignition cut out button, Li type, Series 3
MBL0885

This is a remade cut out button for Series 3 Li type scooters.... [more]


£ 9.47£ 7.89 (Ex Vat)
Lambretta HT lead rubber for frame leg
MBL0913

This rubber fits under the frame cable tie and the HT lead runs through it.... [more]


£ 0.78£ 0.65 (Ex Vat)
Lambretta Spark plug HT lead, per foot
MBU0026

Best quality HT lead, supplied by the foot (approx 30cms).  You need a two foot length for a Lambretta.... [more]


£ 1.15£ 0.96 (Ex Vat)
Lambretta Spark plug HT cap, NGK
MBU0055

We used to only keep the rubber type plug caps as we liked them so much.  But we keep getting asked for these plug caps... [more]


£ 5.51£ 4.59 (Ex Vat)
Lambretta 6 volt, coil spacer, standard, Series 3, zinc plated, MB
MBP0040K

This is a remade spacer as fitted behind the standard HT coil to space it away from the frame it is zinc plated. Made by... [more]


£ 1.76£ 1.47 (Ex Vat)
Lambretta Horn screw, stainless steel, each, MB
MBP0107

This small screw is the correct screw for fixing your horn to your frame on a Series 3 Lambretta.    It is made from... [more]


£ 3.47£ 2.89 (Ex Vat)
Lambretta Rear light unit square headed screw, 6x30mm, stainless steel, MB
MBP0126

This remade screw is used to secure any Series 3 light unit to the frame.    You need two per scooter.    The head of the screw is... [more]


£ 1.94£ 1.62 (Ex Vat)
Lambretta HT lead and throttle cable rubber (fixes to frame) MB
MBP0415

This rubber fits to your frame, the standard throttle cable and HT lead is held in place by it.    Another top quality product made for... [more]


£ 3.23£ 2.69 (Ex Vat)
Lambretta Rear light lens, Li, Sx (holes in centre) CEV
MBL0357

Innocenti in their wisdom used three different types of rear light units on Series 3 Lambrettas.   The Carello type one is on an... [more]


£ 11.46£ 9.55 (Ex Vat)
Lambretta Rear light lens, Series 1, 2, CEV
WMBL1181

Rear light lens to suit Series 1 and 2 rear light units. The mount holes are offset, slightly above centre.... [more]


£ 11.58£ 9.65 (Ex Vat)
£ 0.48£ 0.40 (Ex Vat)
Lambretta 12 volt horn, DC Battery type
MBL1292

This 12 volt DC horn suits all battery models using 12 volt DC systems.    Please note: the horn pictured here is for illustration... [more]


£ 7.73£ 6.44 (Ex Vat)
£ 0.48£ 0.40 (Ex Vat)
Universal battery 12 volt, DC fuse 10 Amp, blade
MBE0064

For use with fuse holder MTT0034 or MBGM0516... [more]


£ 0.48£ 0.40 (Ex Vat)
Lambretta Electrical heat shrink, Black, 1.2mm down to 0.6, 10cm
MBE0067

Electrical heat shrink to fit over a single wire Ideal to make neat repairs to wires. ... [more]


£ 1.15£ 0.96 (Ex Vat)
Lambretta Rear light unit, Sx, Li, Tv
MBL0354

This is a quality Italian pattern rear light unit for Sx, Li, Tv models. This requires a bulb holder or an LED unit. Please note these... [more]


£ 40.99£ 34.16 (Ex Vat)
Lambretta Magneto housing sealing plate kit (2 plates, nuts, washers, studs, grommet and gasket) large electronic type, MB
MBP0418K

This kit includes stainless steel sealing plate, pressed plate, gasket, spit rubber grommet, earth tab, 2 special MB studs and nuts.    Everything you need... [more]


£ 10.13£ 8.44 (Ex Vat)