New Stock Arrivals

Washer wavy 7mm, stainless steel
MBFWW7SS

This fastener has universal applications.... [more]


£ 0.17£ 0.14 (Ex Vat)
Washer wavy 7mm, stainless steel, Bag of 100
MBFWW7SSBAG

This fastener has universal applications.    This is a bag of 100 fasteners.... [more]


£ 6.50£ 5.42 (Ex Vat)
Lambretta Fork steering bearing race on forks, MB
MBL0499

MB UK made lower steering race for the forks.    This race is fitted onto your forks (Series 1, 2, 3)    They often get pitted with rust... [more]


£ 8.05£ 6.71 (Ex Vat)
Lambretta Clutch steel plate, 1.0mm, MB
MBP0001

Designed to use in a 5 or 6 plate clutch. Thinner to allow more room within the clutch to stop clutch drag. ... [more]


£ 3.40£ 2.83 (Ex Vat)
Lambretta Clutch steel plate, 1.5mm, MB
MBP0003

These are standard remade MB clutch steel plates. 3 are required for standard 4 plate clutches. 5 are... [more]


£ 3.40£ 2.83 (Ex Vat)
Lambretta Cable inner, gear, Braided friction free, Race-Tour, MB
MBP0445

Spare Braided Lambretta gear inner cable for the MB stainless friction free cables.    Also fit other outer cables.... [more]


£ 3.54£ 2.95 (Ex Vat)
Lambretta Cable inner, clutch, Braided friction free, Race-Tour, MB
MBP0446

Spare Braided Lambretta clutch inner cable for the MB stainless friction free cables.    Also fit other outer cables.... [more]


£ 3.54£ 2.95 (Ex Vat)
Lambretta Cable inner, throttle, universal, Braided friction free, Race-Tour, MB
MBP0447

Spare Braided Lambretta throttle inner cable for the MB stainless friction free cables.    Also fit other outer cables.... [more]


£ 3.54£ 2.95 (Ex Vat)
Lambretta Headset (handlebar) throttle tube wavy washer, Series 1, 2, stainless steel, MB
MBP0517

Series 1 and 2 throttle tube wavy washer, stainless steel. Made for MB.... [more]


00 (Ex Vat)
Lambretta Oil, gearbox MTL-E 85 (ST90) modern formula gearbox oil, Series 1, 2, 3, Maxima
MBU0523

Superior gearbox oil for all Lambrettas, Series 1, 2 and 3     For all air and water-cooled 2-stroke and 4-stroke transmissions with wet clutch systems.... [more]


£ 10.31£ 8.59 (Ex Vat)
Lambretta Oil, 2 (two) stroke, Formula K2, fully synthetic, Pre-mix only (not for auto lube engines) Maxima
MBU0524

MB have researched into improving lubrication for vintage 2-stroke engines using modern fuels for many years and have found Maxima Oils, a long established... [more]


£ 21.65£ 18.04 (Ex Vat)
Lambretta Electronic ignition, KyTronik Smart Booster advance box
MBU0814

Pronounced ''Key Tronic'' this is the best simple fit advance ignition box on the market for Lambrettas and Vespas engines.    Exclusively available in... [more]


£ 88.97£ 74.14 (Ex Vat)
Lambretta Electronic ignition, KyTronik Spark Magnifier
MBU0816

Features of the Kytroniks Spark Magnifier    Plug and Play, mounted in 5 minutes Hotter spark, easier cold start Improved acceleration and power at low-RPM Help reducing gas consumption Cleaner burns, reduced smoke and emission Protected under high-reliability... [more]


£ 22.93£ 19.11 (Ex Vat)
Lambretta Tool, strobe light gun, Kytronik
MBU0889

New strobe timing light from Kytronik, uses an internal D type battery. Very bright Xenon bulb Easy to transport, only one cable for ignition pickup Compatible with every ignition system: 12V, 6V, electronic CDI,... [more]


£ 48.58£ 40.48 (Ex Vat)
Lambretta Crankshaft and layshaft spacer shim, 25mm ID, 0.5mm, MB
MRB0619M05

This is a special crank shim to fit on the crankshaft between the crank and drive bearing it will space the crank away... [more]


£ 1.84£ 1.53 (Ex Vat)
Lambretta Inlet manifold carb mounting rubber flange type, Dellorto PHBH, MB
MRB0833

This is a Mark Broadhurst redesigned, improved and strengthened flange type carb mounting rubber.     Suits all Dellorto PHBH carbs 26, 28, 30mm,... [more]


£ 18.00£ 15.00 (Ex Vat)
Lambretta Inlet manifold, large block, MB Shorty reed manifold carb mounting adaptor plate with flange rubber, PHBH, MB
MRB0834K

Upgrade your old MB Shorty Reed assembly using the Vespa mounting rubber for the stronger MB flange rubber and mounting adapter plate kit.    Fits... [more]


£ 51.18£ 42.65 (Ex Vat)
Lambretta Inlet manifold, large block, MB Shorty reed valve (block) assembly kit, 6 petal, Dellorto PHBH, MB
MRB0835K

This is a complete MB Shorty Reed valve assembly kit to suit 200cc Oval ported cylinders.  This reed block assembly comes with the excellent Derbi... [more]


£ 129.79£ 108.16 (Ex Vat)